New on Linux, need some advise Autor wątku: Tristan Jimenez
|
|---|
Hi,
I have been working as a freelance translator English-French for only a few months and I am currently using a laptop under Linux..
I have researched the internet for some translation programs that could be installed on Linux, but only found OmegaT.
I am not a computer genius and find it quite difficult to use...
Any suggestion on a nice translation software on Linux? I need to get quicker on my translations...
or maybe I should forge... See more Hi,
I have been working as a freelance translator English-French for only a few months and I am currently using a laptop under Linux..
I have researched the internet for some translation programs that could be installed on Linux, but only found OmegaT.
I am not a computer genius and find it quite difficult to use...
Any suggestion on a nice translation software on Linux? I need to get quicker on my translations...
or maybe I should forget my computer and buy a new one with windows....
Many Thanks!
Tristan ▲ Collapse
| | | | esperantisto 
Local time: 04:40
Członek ProZ.com
od 2006
angielski > rosyjski
+ ...
SITE LOCALIZER | opolt
Niemcy
Local time: 03:40
angielski > niemiecki
+ ...
| Swordfish + Heartsome | Jan 21, 2012 |
Swordfish is maybe the best commercial CAT option available on Linux (judging from the tests that I have done):
http://www.maxprograms.com/products/swordfish.html
The program has a support forum here on ProZ, where you'll get a quick reply in case of problems. The only real problem that I see with Swordfish is that it seems to be a one-man show, so there's always the risk th... See more Swordfish is maybe the best commercial CAT option available on Linux (judging from the tests that I have done):
http://www.maxprograms.com/products/swordfish.html
The program has a support forum here on ProZ, where you'll get a quick reply in case of problems. The only real problem that I see with Swordfish is that it seems to be a one-man show, so there's always the risk that the program might disapppear from the market one day. (Another problem that I've noticed is that S. calls home over the network upon starting, which will keep the interface from becoming available for one minute or so if you are not connected to the Internet at the time.)
Another option is Heartsome, not quite as well-behaved and well supported IMHO, but with an interface quite similar to Swordfish and some interesting add-ons:
http://www.heartsome.net/EN/ourcompany.html
There should be trial version available for both of these.
There's also the free program Virtaal, which has a nice simple interface but does not seem to be an industrial-strength tool with all the bells and whistles:
http://translate.sourceforge.net/wiki/virtaal/index?redirect=1
Virtaal may be available as a preconfigured package from you distro.
Other interesting apps are QT linguist and poedit, these are both software localization editors.
If you are still at the beginning of your career as a translator and/or you are not more or less familiar with Linux, the OS might not be the right option for you, unless you have a powerful machine and are prepared to install a virtual machine to run Windows on it. Or maybe you could use a dual boot setup (installing Linux and Win in parallel on your HD). The reason is that many companies/agencies will require full MS Word compatibility, not to mention Trados etc.
So my advice would be not to switch to Linux 100% from the outset, but to migrate gradually over the years. You'll have to try things out to see what works for you and what doesn't, and a lot depends on the type of customers/documents you have to deal with.
Good luck.
[Edited at 2012-01-21 15:12 GMT]
[Edited at 2012-01-21 15:15 GMT] ▲ Collapse
| | | |
I'd like to add here that you can use Vmware, a virtual machine software. It will let you install windows in Linux, it's like Windows will now be an application. Then, when you have windows, you can install in it any software like Trados, Across, Memoq. etc. I say give it a try, a lot of linux users do this in order to get access to software that is only available in windows.
Cheers!... See more I'd like to add here that you can use Vmware, a virtual machine software. It will let you install windows in Linux, it's like Windows will now be an application. Then, when you have windows, you can install in it any software like Trados, Across, Memoq. etc. I say give it a try, a lot of linux users do this in order to get access to software that is only available in windows.
Cheers!
Martín
VMWARE LINK: http://www.vmware.com/virtualization/virtual-machine.html
[Edited at 2012-01-21 15:38 GMT] ▲ Collapse
| | |
|
|
|
gfichter
USA
Local time: 21:40
angielski
+ ...
| or dual boot | Jan 21, 2012 |
The VMWare suggestion is a good one, and I use it all the time for other purposes, but it is expensive and you still need a Windows license for the virtual machine.
You could also create a dual-boot system with the same hardware and a new hard drive partition, and then you would have a native Windows installation. You still need the Windows license, of course.
If you use Linux most of the time, you can insert a floppy disk or USB key with a different boot setup when yo... See more The VMWare suggestion is a good one, and I use it all the time for other purposes, but it is expensive and you still need a Windows license for the virtual machine.
You could also create a dual-boot system with the same hardware and a new hard drive partition, and then you would have a native Windows installation. You still need the Windows license, of course.
If you use Linux most of the time, you can insert a floppy disk or USB key with a different boot setup when you want to boot into Windows. That might not even be necessary depending on your installation - you might be able to simply select from a menu when you boot up. Windows or Linux. ▲ Collapse
| | | | Heinrich Pesch
Finlandia
Local time: 04:40
Członek ProZ.com
od 2003
fiński > niemiecki
+ ...
|
opolt wrote:
The only real problem that I see with Swordfish is that it seems to be a one-man show, so there's always the risk that the program might disapppear from the market one day.
Not really.
(Another problem that I've noticed is that S. calls home over the network upon starting, which will keep the interface from becoming available for one minute or so if you are not connected to the Internet at the time.)
The program checks for updates at startup. An Internet connection is desirable.
Regards,
Rodolfo
[Edited at 2012-01-24 12:58 GMT]
| | | | To report site rules violations or get help, contact a site moderator: You can also contact site staff by submitting a support request » New on Linux, need some advise | Wordfast Pro | Translation Memory Software for Any Platform
Exclusive discount for ProZ.com users!
Save over 13% when purchasing Wordfast Pro through ProZ.com. Wordfast is the world's #1 provider of platform-independent Translation Memory software. Consistently ranked the most user-friendly and highest value
Buy now! » |
| | Trados Business Manager Lite | Create customer quotes and invoices from within Trados Studio
Trados Business Manager Lite helps to simplify and speed up some of the daily tasks, such as invoicing and reporting, associated with running your freelance translation business.
More info » |
|
| | | | X Sign in to your ProZ.com account... | | | | | |
Login to reply/comment 
