CATs that allow disabling of segmentation Thread poster: Annaana
|
|---|
Annaana
Local time: 20:39
Inggris menyang Serbia
+ ...
Hi,
I browsed a little, still couldn't find an answer.
The question is simple:
Is there a CAT that allows complete disabling of segmentation?
I once tried all trial versions available, before deciding what to buy, and gave up before even trying to customize them.
I'm not into downloading and trying all of them again if there are professionals who already use them and know immediately what I need.
Thank you in advance!
| | | | Sheila Wilson 
Spain
Local time: 19:39
Member (2007)
Inggris
+ ...
| What's left? | Jun 17, 2016 |
Annaana wrote:
Is there a CAT that allows complete disabling of segmentation?
What would you see as the advantages of using a CAT without any segmentation? I can't visualise it. I suppose it could convert number formats for you, put a space before punctuation if appropriate, but what else?
| | | | | Swordfish has that option | Jun 17, 2016 |
Hi,
In Swordfish you can select "Paragraph Segmentation" when processing documents. When that option is selected, the program uses the structure of the original document instead of trying to segment text at sentence level.
That works great when you work with non technical prose and you don't expect many matches from TM.
Regards,
Rodolfo
| | | | Annaana
Local time: 20:39
Inggris menyang Serbia
+ ...
TOPIC STARTER
I need CATs for a fast termbase (main thing), and this would be of great help while I'm translating. An instant visual suggestion.
I've been translating since ages and I simply can't understand the point of segmentation. I've been trying this CAT things, trying... and it only slows me down.
I usually need to translate very very quickly. Five pages - one or two hours. Every minute is important, always. The very action of opening a CAT, project, loading... cuts me precious seve... See more I need CATs for a fast termbase (main thing), and this would be of great help while I'm translating. An instant visual suggestion.
I've been translating since ages and I simply can't understand the point of segmentation. I've been trying this CAT things, trying... and it only slows me down.
I usually need to translate very very quickly. Five pages - one or two hours. Every minute is important, always. The very action of opening a CAT, project, loading... cuts me precious several minutes.
I don't need segmentation. It disturbs (visually) the meaning, cuts off the phrases that should be together and so on. It slows me down.
I don't get the explanation of "this way, you won't miss a word". How can I miss a word or sentence? How is it possible to not see a paragraph and just skip it?
I don't know how the termbase would work without it though.
@Rodolfo
Thank you. I will test it. ▲ Collapse
| | |
|
|
|
esperantisto
Local time: 22:39
Member (2006)
Inggris menyang Rusia
+ ...
SITE LOCALIZER | Alexander Somin
Germany
Local time: 20:39
Inggris menyang Rusia
+ ...
SITE LOCALIZER | Across, Studio. | Jun 17, 2016 |
You could find this option in Across.
in Studio: go to Project Settings->Language Pairs->Translation Memory and AT->Settings->Language Resources->Segmentation Rules and hit Edit. You'll find 2 options: either Paragraph based or Sentence based segmentation.
In memoQ: it is also possible, but is a bit complicated and you'll need to define your segmentation rules anew in Resources->Segmentation Rules.
[Edited at 2016-06-17 20:49 GMT]
| | | | Samuel Murray
Netherlands
Local time: 20:39
Member (2006)
Inggris menyang Afrikaan
+ ...
| You want to segment by page, then? | Jun 17, 2016 |
Annaana wrote:
Is there a CAT that allows complete disabling of segmentation?
No, because without segmentation, the CAT tool won't be able to offer any suggestions during translation. And no, because then concordance searches would be practically useless, as any search result will show the entire file that the search string occurs in, instead of the sentence or paragraph in which it occurs.
Most CAT tools do allow you to disable sentence segmentation, i.e. to use so-called paragraph segmentation. In some cases, this would be useful to you. However, even with "paragraph" segmentation, the items in e.g. a list would often still be given as separate segments.
I once tried all trial versions available, before deciding what to buy, and gave up before even trying to customize them. ... I'm not into downloading and trying all of them again if there are professionals who already use them and know immediately what I need.
Sure, no problem.
OmegaT: Press Ctrl+E (project properties) and deselect "Enable sentence-level segmenting" (only available if you have a project open)
Wordfast Classic: Click WFC icon, then go to Settings > General, double-click "End-of-segment punctuation", and type a space.
Wordfast Pro 3: Go Edit > Preferences > Translations > Segmentation Settings. Then disable "wfsegmentation.properties" and enable "breaksegmentation.properties".
Wordfast Pro 4: Click the icon that starts with three horizontal dashes (as if it's a mobile app), and then click Preferences. Go to Segmentation, and remove everything.
Trados 2007: Run Translators' Workbench, then go File > Setup > Segmentation Rules, and then delete all options.
Trados 2015: Go to Translation Memory view, then right-click your TM and select Settings > Language Resources > Segmentation Rules and click Edit. Then do some stuff there. I'm not sure what'll happen if you use multiple TMs.
MemoQ: Go to a project's "home" page, click the Settings button, then click the Segmentation Rules button (it uses mystery meat navigation). Right-click you're project's rule set and select "Edit". Then remove everything.
...and now you know which CAT tools I have on my computer.
[Edited at 2016-06-17 20:30 GMT]
| | | | Samuel Murray
Netherlands
Local time: 20:39
Member (2006)
Inggris menyang Afrikaan
+ ...
| For you, I'd suggest Wordfast Classic | Jun 17, 2016 |
Annaana wrote:
I usually need to translate very very quickly. Five pages - one or two hours. Every minute is important, always. The very action of opening a CAT, project, loading... cuts me precious several minutes.
Then I would recommend Wordfast Classic. You have to change the settings once, but from then on your settings are always the same (unless you change them again or create an alternative profile), and if your TMs and glossaries are located in a location that is fixed (i.e. not in a folder that you move around) (and you always use the same TMs and glossaries, which I think would suit you), you can start translating immediately. When you're done, just click the "Quick Clean" button.
I don't know how the termbase would work without it though.
You don't need [sentence] segmentation to make a termbase (glossary) work. You do need segmentation to make a translation memory work, but it will work with paragraph segmentation just fine.
| | |
|
|
|
DZiW (X)
Ukraine
Inggris menyang Rusia
+ ...
Once there was SnowBall (from Total Recall ApS), which used a different (unusual, non-standard) approach with free segmentation rules right in MS Word environment; it looked promising (check youtube, if interesting).
However, now its trmem.com seems down, alas; no other innovations appeared to be viable (even for awhile).
| | | | CafeTran Training (X)
Netherlands
Local time: 20:39
If I've understood Michael Beijer correctly, Felix offers you the flexibility in segmentation that you are looking for. It allows you to select any chunk of a document opened in MS Word yourself.
| | | | Annaana
Local time: 20:39
Inggris menyang Serbia
+ ...
TOPIC STARTER | Trying it again | Jun 18, 2016 |
Thank you all for your suggestions and help, especially Samuel, for such a detailed explanation.
I guess I shall try again this thing and try to get used to it this time.
| | | | CafeTran Training (X)
Netherlands
Local time: 20:39
| Segmentation in Felix | Jun 18, 2016 |
Michael wrote:
Segmentation is even easier in Felix: you just select whatever you want to constitute your source segment (including semicolons or colon, if you want), and press Alt+L. You then type your translation over that, and save it to your TM. Then on to the next sentence. Felix leaves nothing behind but your translation. That is: no hidden codes, no bilingual, uncleaned mess, which will invariably cause something to go wrong when trying to finalise/clean your files at the end of the job.
In my opinion, the developer of Felix had a brilliant idea: if you want to work in Word, you really want to work in Word, you don't want to do it half way (like Wordfast Classic, Anaphraseus, MetaTexis and LogiTerm — the other Word-based CAT tools). That is, you don't want to be forced to translate inside some special little dialogue (like in LogiTerm), and you don't want to litter your document with hidden codes, so you mess up the page visually. One of the main reasons for translating in Word (in addition to finally getting to benefit from Dragon's Full Text Control!!) is so you can retain the original context, and be free to move sentences around willy nilly, wherever and whenever you see fit. In Felix, this is no problem. In the other tools it can be really difficult once a section is translated to go back and make major changes to it. Not so in Felix.
Also keep in mind that until very recently, Felix was a tool that you had to pay for, but which is now 100% free.
[Edited at 2016-06-18 08:37 GMT]
| | |
|
|
|
Annaana
Local time: 20:39
Inggris menyang Serbia
+ ...
TOPIC STARTER
To be sincere, I think I wouldn't even have problem with segmentation if it wasn't for visible tags. I just need to see which one offers it as a wysiwyg and I'm good.
Maybe I rushed a little with opening this topic.
I see Samuel's reply in other topic about this:
"The only current CAT tools that offer WYSIWYG in the true, original sense of the word, are Wordfast Classic, Metatexis and Felix. Very old versions of Trados also offered it."
I'll try it th... See more To be sincere, I think I wouldn't even have problem with segmentation if it wasn't for visible tags. I just need to see which one offers it as a wysiwyg and I'm good.
Maybe I rushed a little with opening this topic.
I see Samuel's reply in other topic about this:
"The only current CAT tools that offer WYSIWYG in the true, original sense of the word, are Wordfast Classic, Metatexis and Felix. Very old versions of Trados also offered it."
I'll try it this way first. ▲ Collapse
| | | | Sheila Wilson
Spain
Local time: 19:39
Member (2007)
Inggris
+ ...
| Paragraph segmentation | Jun 20, 2016 |
Annaana wrote:
I see Samuel's reply in other topic about this:
"The only current CAT tools that offer WYSIWYG in the true, original sense of the word, are Wordfast Classic, Metatexis and Felix. Very old versions of Trados also offered it."
I'll try it this way first.
Wordfast Classic certainly offers paragraph segmentation. I thought all CATs did, but maybe that's because Wf Classic is the only one I really use (although I've dabbled with Wf Pro and Anywhere).
| | | | Michael Beijer
United Kingdom
Local time: 19:39
Member
Walanda menyang Inggris
+ ...
| In memoQ, you create your own paragraph-based segmentation rules by deleting a few rules | Oct 11, 2023 |
In memoQ, you can create your own paragraph-based segmentation rules by deleting a few rules from the default seg rules. I sometimes find it useful to use paragraph-based segmentation rules in marketing texts where it is pointless to chop everything up into tiny bits.
| | | | To report site rules violations or get help, contact a site moderator: You can also contact site staff by submitting a support request » CATs that allow disabling of segmentation | Wordfast Pro | Translation Memory Software for Any Platform
Exclusive discount for ProZ.com users!
Save over 13% when purchasing Wordfast Pro through ProZ.com. Wordfast is the world's #1 provider of platform-independent Translation Memory software. Consistently ranked the most user-friendly and highest value
Buy now! » |
| | Anycount & Translation Office 3000 | Translation Office 3000
Translation Office 3000 is an advanced accounting tool for freelance translators and small agencies. TO3000 easily and seamlessly integrates with the business life of professional freelance translators.
More info » |
|
| | | | X Sign in to your ProZ.com account... | | | | | |
Login to reply/comment 
Translation news related to CAT tools
